Logistics and Aesthetics of Ponte Vecchio

Ponte Vecchio, Florence, Italy
Photo from Wiki Commons

The Ponte Vecchio is unique in that it does not maintain the same symmetrical balance of Florence’s architecture that shares a similar date. What makes the Ponte Vecchio so unique is its protruding structures. Small storefronts extend out over the Arno River with no particular pattern. Sparsely placed, these structures make the bridge, as a whole, look unfinished, but beautiful in its unique off-balanced unity. “You could call Ponte Vecchio a pasticcio, a mish-mash, or at least an arrangement of contradictory architectural notes" (Pridmore). The varied colors of the protruding structures make them the focal point of the asymmetrical bridge. The mechanical aspect of the bridge is quite linear and rhythmic; it consists of three arches, the center arch slightly longer than its neighboring arches. The variety exists in the extended structures. The functional portion of the bridge is what maintains unity. “Ponte Vecchio's architecture of countless fragments reflects this city's incalculable memory or, more simply, its lovely imperfections touch deep emotions" (Pridmore). 

Essay by Georgia Button and Kate Logue.

Bibliography

Pridmore, Jay. "Ponte Vecchio, a Bridge That Spans Centuries." The Wall Street 

     Journal: n. pag. Web. 28 Nov. 2012. <http://online.wsj.com/article/ 

     SB10001424052748704717004575268933589711578.html>. 

This article from the Wall Street Journal: Europe Edition gives a brief overview of the history and architecture of the Ponte Vecchio, discussing its form as well as its function. 

 The Earliest Guide to Florentine Architecture, 1423. Florence: 

     Kunsthistorisches Institut, 1969. JSTOR. Web. 28 Nov. 2012. 

     <http://www.jstor.org/stable/10.2307/27652221>. 

This book, found on JSTOR, covers Florentine Architecture and features a small but informative section about the Ponte Vecchio, utilizing primary sources and scholarly information. 

History of "The Oldest Bridge in Florence"

Ponte Vecchio, Florence, Italy
Photo from Wiki Commons

The Ponte Vecchio, designed by Taddeo Gaddi, arches over Florence’s Arno River at its narrowest point. Initially, bridge storefronts were utilized by butchers; however, over time, and through natural destruction and reconstruction, it has become a treasure trove full of equal numbers of jewels and tourists. “The version preceding the present one was completed around 1200. Remembered for its five high arches and "camel back" profile, it became the old bridge as several new ones went up shortly afterward to serve a population of 100,000” (Pridmore). This has garnered the bridge a reputation of status and antique appeal for locals and tourists. The proportions are fitting to the unique historic European style: modest and small portions extending out from a bridge, barely wide enough for two cars to pass each other. Each storefront is so small that they are out of proportion with the rest of the larger tourist shopping areas surrounding the Ponte Vecchio that have been built more recently and on a slightly larger scale. Further, the Ponte Vecchio is not only a destination for its own beauty; Dati points out that, “shops on both sides make it seem not a bridge, except at the center where there is a piazza with parapets, which show off the river above and below... In this case he is pointing out a view of nature, the river, as it is heightened by a man-made frame" (The Earliest Guide). The Ponte Vecchio not only stands in beauty itself, but guides the eye to the natural beauty of Florence. 

Essay by Georgia Button and Kate Logue 

Bibliography

Pridmore, Jay. "Ponte Vecchio, a Bridge That Spans Centuries." The Wall Street 

     Journal: n. pag. Web. 28 Nov. 2012. <http://online.wsj.com/article/ 

     SB10001424052748704717004575268933589711578.html>. 

This article from the Wall Street Journal: Europe Edition gives a brief overview of the history and architecture of the Ponte Vecchio, discussing its form as well as its function. 

 The Earliest Guide to Florentine Architecture, 1423. Florence: 

     Kunsthistorisches Institut, 1969. JSTOR. Web. 28 Nov. 2012. 

     <http://www.jstor.org/stable/10.2307/27652221>. 

This book, found on JSTOR, covers Florentine Architecture and features a small but informative section about the Ponte Vecchio, utilizing primary sources and scholarly information. 

FAST FACTS

Panorama of Ponte Vecchio
Photo from Wiki Commons

• The Ponte Vecchio is a Medieval bridge that spans the Arno River in Florence, Italy

• Giorgio Vasari claimed that Taddeo Gaddi was the architect of the bridge

• It was first constructed in the Roman Era, and first documented around 960CE.

• It has been destroyed twice by floods: first in 1117CE, then in 1333CE. Today the architecture remains intact from 1345.

• The Ponte Vecchio is a segmental stone arch bridge, consisting of three segmental arches

• The longest arch spans 30 meters, and the two shorter arches span 27 meters

• The Ponte Vecchio serves many practical purposes: a way to cross the Arno River, and it is home to many jewelry shops

• Traditionally, the Ponte Vecchio has always been home to shops and merchants. It used to have butchers and meat shops, but then transitioned to jewelers.

• The Ponte Vecchio is the only bridge in Florence to survive the bombing that occurred during WWII.

Post by Georgia Button and Kate Logue.

Renaissance Sculpture

The Cross-Legged Captive (c. 1530-1535) is a carved marble piece by Michelangelo. It stands in the Galleria dell’Accedemia in Florence, Italy. Michelangelo is known for his work in carving. Marble carving can be done by hand or with tools. Artists manipulate a pliable material into a three dimensional shape. The drawback is that once, a chunk has been chipped, it cannot be unchipped.

The Cross-Legged Captive by Michelangelo
Photo from Wiki Commons

Benvenuto Cellini's Perseus with the Head of Medusa (c. 1545) is a bronze-cast sculpture which stands in the Loggia dei Lanzi of Piazza della Signoria in Florence, Italy. A liquid metal is poured into a mold and once it is dry, it is extremely durable. Bronze is the most popular form of casting.

Perseus with the Head of Medusa by Benvenuto CelliniPhoto from Wiki Commons 

Terracotta model of the Blessed Ludovica Albertoni (c.1671- 1674) by Gianlornzo Bernini, standing in Rome, Italy. Not many terracotta pieces remain in good quality seeing as modelling, with substances such as clay, does not last as long as harder materials such as bronze or marble. However, modeling allows for manipulation and re-manipulation until the clay hardens and is fired.

Blessed Ludovica Albertoni by Gianlornzo Bernini
Photo from here.

Architectural Reflections

http://www.youtube.com/watch?v=SAHS9sZLx0M&feature=youtu.be

Prints

Screen Print by Andy Warhol
Photo from Wiki Commons

Woodcut
I chose the woodcut print entitled Savage Breeze by Helen Frankenthaler. She is an “Abstract Expressionist, distinguished by her inspiration in nature.” She uses the wood grain to aid her artwork, giving it texture and interesting coloring due to the adsorption.  

Etching
Edward Hopper was able to create his piece, American Landscape, with incredible detail and use of line due to the process of Etching. Etching does not require a great deal of depth in the hand of the carver because an acid wash aids in depth.  

Lithography
Emil Nolde’s Young Couple is an excellent example of lithography. The oily surface of the image creates a print with the same visual value as a crayon drawing. The couple’s clothes are able to have texture due to this type of printmaking.

Screenprint
Wide Light by Josef Albers shows the crisp lines that can be attained through screenprinting. Rather than carving a surface, artists are able to create sharp-lined stencils and apply them to a screen- making their works focus on geometric shape.

Italian Renaissance Paintings

An artist's best friend
Photo from Wiki Commons

Fra Angelico's Annunciation (c. 1438-1447) is a fresco, a painting on a plaster wall, within the San Marco Monastery. Frescos show true talent of the artists considering the limitations of the medium. Frescos require much planning and speed. They must be completed in one day, and can create visible seems. Many colors, blue in particular, are difficult to manipulate because they do not work well with the lime plaster.

The Crucifix by Giotto (c. 1290-1300) is a Proto-Renaissance piece comprised of gold and tempera on panel that hangs in Santa Maria Novella. The paint is created from ground pigments mixed with a vehicle of egg yolk or whole egg, thinned with water. It was extremely popular amongst Greeks and Romans, prior to the fourteenth century. The reason so many artists used tempera is because it is extremely durable, can create brilliant colors and is not compromised by oxidation.


Nativity of Jesus (c. 1573) by Giovanni Battista Naldini is an oil painting which was commissioned to be put in Santa Maria Novella. Oil painting consists of ground pigments combined with a linseed oil vehicle and a turpentine medium or thinner. There was a gradual shift from tempera to oil paint in during the Renaissance. Oil allowed artists to blend colors, paint on larger scales, and take a longer amount of time to finish each work.